This document describes the current state of the quota and projects system, and proposes a new design for projects that would function as resource pools. It sketches implementation details and migration concerns.
Each Synnefo user is granted quota for several resources. These quota originate from two different sources: the system and projects. By default a user holds so-called base quota granted by the system upon activation; base quota can be customized per user. When a user joins a project, resources offered by the project add up to the existing quota, increasing the total amount of resources one can reserve.
This design fails to associate an actual (reserved) resource (e.g. VM) with a particular project. There is no way to tell which project a resource originates from and is thus not possible to employ any targeted policy when a user leaves a project, such as reclaiming the granted resource. It is also not possible to employ more advanced access control on resources, such as sharing VMs among members of a project.
We will alter project semantics so that a project is viewed as a pool of finite resources. Each project member can reserve a portion of these resources up to a specified limit. Each actual resource (e.g. VM) is associated with a particular project. Admission of a user to a project will no more result in increasing the user’s existing overall quota, but in defining new project-specific quota for the user.
A project defines a pair of limits for each resource that it grants (e.g. cyclades.vm): project-level limit and member-level limit; The former is the total amount of a resource that this project can grant; the latter is the maximum amount that an individual user (project member) can reserve and cannot exceed the former. A limit on the number of members allowed is still enforced.
Projects will be the sole source of resources. Current base quota offered to users by the system will be expressed in terms of special-purpose system projects. Due to the central role that projects now acquire, we will alter the project schema to facilitate project creation and modification without the extra overhead of submitting and approving applications.
For reasons of uniformity, we replace the base quota mechanism with projects. In a similar vein to OpenStack tenants, we define new user-specific system projects to account for the base quota for each user. These projects should be clearly associated with a single user, restrict join/leave actions and specify the quota granted by the system. When a user is accepted, their system project will be automatically created, activated, and linked back to the user, granting the default resource quota. These projects will have no owner, marked thusly as `system’ projects. The administrator can, following the usual project logic, alter quota by modifying the project. Users cannot apply for modification of their system projects.
Projects will, from now on, be identified by a UUID. System projects will receive the same UUID as the user itself. ProjectID, which appears above in the Quotaholder entries, refers to the project UUID. When a system project is created for a user, there is a slight probability the user’s UUID is already in use by another project; in this case one can only delete the user and create a new one in its place.
Base quota will be expressed both in terms of a project-level and a member-level limit. This will result in two operationally equivalent Quotaholder counters, as in the following example. In the future, we could admit third-party users to a user’s system project; in that case, those counters would differ.
resource holder source limit usage
------------|--------------|--------------|-------|------
cyclades.vm project:uuid None 5 1
cyclades.vm user:uuid project:uuid 5 1
Since the introduction of system projects will explode the number of total projects, we will need to control their visibility. We add a new flag private in project definitions. A private project can only be accessed by its owner and members and not be advertized in the UI. System projects are marked as private.
System projects do not fit well in the current project/application scheme, because no user has applied for them. Moveover, we would like to easily modify project properties, particularly quota limits, without the need to apply for an application for each project and then approve it.
We will decouple projects from applications by incorporating the project definition into the project object rather than relying on an application. The system will directly make a new (system) project upon user creation and a privileged user will be able to modify an existing project by directly modifying it. An unprivileged user will still need to make an application.
The project model is adapted to reference the last application that is related to the project, if any—projects automatically created by the system reference no application. For an uninitialized project, this denotes the original application through which the project was made. If the application is denied or cancelled, the whole project is considered deleted.
Application for a new project is created in state pending and its properties are copied into a new project object, which is in state uninitialized. To preserve this equality, we disallow modifications of uninitialized projects, either in-place or through an application. An already activated project can be modified by submitting an application containing just the desired changes. An application object stores the specified changes and should remain read-only.
Each resource registered in the system is assigned a default quota limit. A newly-activated user is given these limits as their base quota. This is till now done by copying the default limits as user’s entries in AstakosUserQuota. Default limits will from now on be copied into the system project’s resource definitions.
Conventional projects are created through a project application, which may not specify limits for all resources registered in the system. In fact, it may even be impossible to specify a resource, if it is set api_visible=False. We have to somehow specify these limits. Defaulting to zero is not appropriate: if we don’t want to control a resource, we would like it set to infinite. We thus need an extra skeleton, like the one specifying the default base quota, in order to fill in missing limits for conventional projects. It will be controled by a new option --project-default of command resource-modify.
When a project is activated, either directly in the case of system projects or through the approval of a project application, limits for resources not specified are automatically completed by consulting the appropriate skeleton.
When a service allocates a new resource, it should associate it both with a user and a project. The commission issued to the Quotaholder should attempt to update all related counters. For example, it should include the following provisions:
"provisions": [
{
"holder": "user:user-uuid",
"source": "project:project-uuid",
"resource": "cyclades.vm",
"quantity": 1
},
{
"holder": "project:project-uuid",
"source": None,
"resource": "cyclades.vm",
"quantity": 1
},
{
"holder": "user:user-uuid",
"source": "project:project-uuid",
"resource": "cyclades.cpu",
"quantity": 2
},
{
"holder": "project:project-uuid",
"source": None,
"resource": "cyclades.cpu",
"quantity": 2
}
]
If any of these provisions fails, i.e. either on the project-level limits or the user-level ones, the whole commission fails.
The astakosclient call issue_one_commission will be adapted to abstract away the need to write both the user-level and the project-level provisions. The previous commission will be issued with:
issue_one_commission(holder="user-uuid", source="project-uuid",
provisions={"cyclades.vm": 1, "cyclades.cpu": 2})
The service is responsible to record this resource-to-project association. In Cyclades, each VM, floating IP, or other distinct resource should be linked to a project. Pithos should link containers to projects.
Astakos will handle its own resource astakos.pending_app in a special way: it will always be charged at the user’s system project.
The system will support reassigning a resource to a new project. One needs to specify all related resource values. Astakosclient will provide a convenience function issue_resource_reassignment to construct all needed provisions. For instance, reassigning a VM with two CPUs can be done with:
issue_resource_reassignment(holder="user-uuid",
from_source="from-uuid", to_source="to-uuid",
provisions={"cyclades.vm": 1, "cyclades.cpu": 2})
This will issue the following provisions to the Quotaholder:
"provisions": [
{
"holder": "user:user-uuid",
"source": "project:from-uuid",
"resource": "cyclades.vm",
"quantity": -1
},
{
"holder": "project:from-uuid",
"source": None,
"resource": "cyclades.vm",
"quantity": -1
},
{
"holder": "user:user-uuid",
"source": "project:from-uuid",
"resource": "cyclades.cpu",
"quantity": -2
},
{
"holder": "project:from-uuid",
"source": None,
"resource": "cyclades.cpu",
"quantity": -2
},
{
"holder": "user:user-uuid",
"source": "project:to-uuid",
"resource": "cyclades.vm",
"quantity": 1
},
{
"holder": "project:to-uuid",
"source": None,
"resource": "cyclades.vm",
"quantity": 1
}
{
"holder": "user:user-uuid",
"source": "project:to-uuid",
"resource": "cyclades.cpu",
"quantity": 2
},
{
"holder": "project:to-uuid",
"source": None,
"resource": "cyclades.cpu",
"quantity": 2
}
]
API call GET /quotas is extended to incorporate project-level quota. The response contains entries for all projects for which a user/project pair exists in the quotaholder:
{
"project1-uuid": {
"cyclades.ram": {
"usage": 2147483648,
"limit": 2147483648,
"pending": 0,
"project_usage": ...,
"project_limit": ...,
"project_pending": ...
},
"cyclades.vm": {
...
}
}
"project2-uuid": {
...
}
}
An extra or differentiated call may be needed to retrieve the project quota regardless of user:
GET /quotas?mode=projects
{
"project-uuid": {
"cyclades.ram": {
"project_usage": 2147483648,
"project_limit": 2147483648,
"project_pending": 0
}
"cyclades.vm": {
...
}
}
}
GET /service_project_quotas will be used in a similar way as GET /service_quotas to get the project-level quotas for resources associated with the Synnefo component that makes the request.
All service API calls that create resources can specify the project where they will be attributed.
In cyclades, POST /servers (likewise for networks and floating IPs) will receive an extra argument project. If it is missing, the user’s system project will be assumed. In calls detailing a resource (e.g., GET /servers/<server_id>), the field tenant_id will contain the project id.
Moreover, extra calls will be needed for resource reassignment, e.g:
POST /servers/<server-id>/action
{
"reassign": {"project": <project-id>}
}
In pithos, PUT and POST calls at the container level will accept an extra optional policy project. The former call assigns a newly created container to a given project, the latter reassigns an existing container. Field x-container-policy-project will be retrieved by a HEAD call at the container level.
PUT /projects/<proj_id> will be used to mod a new project replacing POST. It now expects a dictionary with just the desired changes, not a complete project definition. It is only allowed if the project is already activated.
GET /projects/<proj_id> changes to include a last_application field, if applicable.
Application actions (approve, deny, dismiss, cancel) are integrated into project actions and expect an extra app_id argument to specify the application. Actions are allowed only on a project’s last application; the application id is required in order to avoid races.
The applications API is removed, incorporated into the projects API.
User quota will be presented per project, including the aggregate activity of other project members: the Resource Usage page will include a drop-down menu with all relevant projects. By default, user’s system project will be assumed. When choosing a project, usage for all resources will be presented for the given project in the following style:
limit
used ^ taken by others
|::::::|..............|...........|::::::::::::::::::::::::::::::::::|
^ ^ ^
usage effective project
limit limit
limit
used ^ taken by others
|::::::|........|:::::|::::::::::::::::::::::::::::::::::::::::::::::|
^ ^ ^
usage effective project
limit limit
Text accompanying the bar could mention usage based on the effective limit, e.g.: usage out of effective limit Virtual Machines. Likewise the shaded used part of the bar could express the same ratio in percentage terms.
Given the above-mentioned response of the /quotas call, the effective limit can be computed by:
taken_by_others = project_usage - usage
effective_limit = min(limit, project_limit - taken_by_others)
Projects show up in a number of service-specific user interactions, too. When creating a Cyclades VM, the flavor-choosing window should first ask for the project where the VM will be charged before showing the available resource combinations. Likewise, creating a new container in Pithos will prompt for picking a project to associate with.
Resource presentation (e.g. Cyclades VMs) will also mention the associated project and provide an action to reassign the resource to a different project.
Quota can be queried per user or project:
# snf-manage user-show <id> --quota
project resource limit effective_limit usage
-------------------------------------------------
uuid cyclades.vm 10 9 5
# snf-manage project-show <id> --quota
resource limit usage
------------------------
cyclades.vm 100 50
A new command snf-manage project-modify will enable in-place modification of project properties, such as their quota limits.
Currently, the administrator can change the user base quota with: snf-manage user-modify <id> --base-quota <resource> <capacity>. This will be removed in favor of the project-modify command, so that all quota are handled in a uniform way. Similar to user-modify --all, project-modify will get options --all-system-projects to allow updating base quota in bulk.
Existing projects need to be converted to resource-pool ones. The following steps must be taken in Astakos:
- compute project-level limits for each resource as max_members * member-level limit
- create system projects based on base quota for each user
- make Quotaholder entries for projects and user/project pairs
- assign all current usage to the system projects (both project and user/project entries)
- set usage for all other entries to zero
Cyclades and Pithos should initialize their project attribute on each resource with the user’s system project, that is, the same UUID as the resource owner.
Once migration has finished, users will be off-quota on their system project, if they had used additional quota from projects. To alleviate this situation, each service can attempt to reassign resources to other projects, following this strategy:
- consult Astakos for projects and quota for a given user
- select resources that can fit in another project
- issue a commission to decrease usage of the system project and likewise increase usage of the available project
- record the new ProjectUUID for the reassigned resources